2015年12月23日星期三

6706 Deep Groove Ball Bearing

6706 Deep Groove Ball Bearing

6706 Deep Groove Ball Bearings specification:

Model:6706
Inside diameter (ID d): 30 mm
Outside diameter (OD D): 37 mm
Thickness (B/T/H): 4 mm
Basic dynamic load rating (Cr): 1.14 kN
Basic static load rating (Cor): .95 kN
Reference speed (Grease rpm): 3300 r/min
Limiting speed (Oil rpm): 3800 r/min
Mass (M):0.006 kg
Brand:---
Category:Deep Groove Ball Bearings
0 Read More →

6705 Deep Groove Ball Bearing

6705 Deep Groove Ball Bearing

6705 Deep Groove Ball Bearings specification:

Model:6705
Inside diameter (ID d): 25 mm
Outside diameter (OD D): 32 mm
Thickness (B/T/H): 4 mm
Basic dynamic load rating (Cr): 1.1 kN
Basic static load rating (Cor): .84 kN
Reference speed (Grease rpm): 4000 r/min
Limiting speed (Oil rpm): 4600 r/min
Mass (M):0.005 kg
Brand:--
Category:Deep Groove Ball Bearings
0 Read More →

2015年12月22日星期二

Spherical Roller Bearing

Spherical Roller Bearing

Spherical Roller Bearing

Spherical roller bearings are intended for accommodation of radial load, but they simultaneously can accommodate axial load, acting in both directions and not exceeding 25% of unused permissible value of radial load.
They are self-aligning bearings and they are able to compensate considerable misalignment, caused by shaft deflection under load and technical errors during the machining of seatings, or unit assembling. Bearings performance is kept when misalignment of the inner ring axes relative to the outer ring axes is about two degrees. 
Minhang Bearing can supply CA CC MA MB type spherical roller bearings with straight bore and tapered bore.
0 Read More →

Angular Contact Ball Bearing

Angular Contact ball bearing

Angular Contact Ball Bearing

We are mainly supply the angular contact ball bearings include:
1) Thin section angular contact ball bearings
    - 718 719 series and inch series
2) Four-point angular contact ball bearings
3) Double row angular contact ball bearings
2) Hub bearing units - DAC Series
Information about these products can be supplied on request.

Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis. 
This means that they are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle. 

0 Read More →

Thin Section Bearing

Thin Section Bearing 61800 61900 Series

Thin Section Bearing 61800 61900 Series

Minhang Bearing regularly supply the 61800 61900 series thin section bearings - single row deep groove ball bearings.

We can supply this bearing with pressed steel cage ( no relevant suffix - 61805 ), machined solid brass cage ( suffix M - 61824M ) and engineerring plastic cage ( suffix TN - 61805TN ).

61800 and 61900 Type

There are thin section single row deep groove ball bearings available in open, shielded and sealed type. Bearings with a snap ring -NR type are also available. These bearings with low maintenance and simple structure are widely used in general and special application.

61800 and 61900 Bearing Range

61805 - 618/800
61905 - 619/800


Features

Low friction and irregular torque, highly efficeint power transmission and smooth ratating performance.
P6, P5 precision grade bearings will be with super high speed performance.

Minhang bearing sypply complete 61800 61900 series bearings with fine quality and reasonable prices. Meanwhile, there are many items are in stock all the year round, please contact our sales for the detials.
0 Read More →

Thin Section Ball Bearing Inch Series

thin Section Ball Bearing Inch Series

Thin Section Ball Bearing Inch Series

Minhang Bearings, as a bearing factory, can supply the inche series thin section ball bearing 9 primary cross section sets - ranging from 3/16" to 1"and with bore sizes ranging from 1" to over 40".
SYMH
Designation		 Dimension(inch) Mass
Bore O.D. B (lbs)
KA-20 CPO 2.0000 2.5000 0.2500 0.090
KA-25 CPO 2.5000 3.0000 0.2500 0.110
KA-30 CPO 3.0000 3.5000 0.2500 0.130
KA-35 CPO 3.5000 4.0000 0.2500 0.150
KA-40 CPO 4.0000 4.5000 0.2500 0.170
KA-42 CPO 4.2500 4.7500 0.2500 0.200
KA-45 CPO 4.5000 5.0000 0.2500 0.210
KA-47 CPO 4.7500 5.2500 0.2500 0.220
KA-50 CPO 5.0000 5.5000 0.2500 0.230
KA-55 CPO 5.5000 6.0000 0.2500 0.260
KA-60 CPO 6.0000 6.5000 0.2500 0.280
KA-65 CPO 6.5000 7.0000 0.2500 0.300
KA-70 CPO 7.0000 7.5000 0.2500 0.320
KA-75 CPO 7.5000 8.0000 0.2500 0.340
KA-80 CPO 8.0000 8.5000 0.2500 0.360
KA-90 CPO 9.0000 9.5000 0.2500 0.410
KA-100 CPO  10.0000 10.5000 0.2500 0.450
KA-110 CPO  11.0000 11.5000 0.2500 0.500
KA-120 CPO 12.0000 12.5000 0.2500 0.540
KB-20 CPO  2.0000 2.6250 0.3125 0.150
KB-25 CPO 2.5000 3.1250 0.3125 0.170
KB-30 CPO 3.0000 3.6250 0.3125 0.210
KB-35 CPO  3.5000 4.1250 0.3125 0.240
KB-40 CPO 4.0000 4.6250 0.3125 0.270
KB-42 CPO 1.2500 4.8750 0.3125 0.310
KB-45 CPO 4.5000 5.1250 0.3125 0.330
KB-47 CPO 4.7500 5.3750 0.3125 0.350
KB-50 CPO 5.0000 5.6250 0.3125 0.370
KB-55 CPO 5.5000 6.1250 0.3125 0.400
KB-60 CPO 6.0000 6.6250 0.3125 0.430
KB-65 CPO 6.5000 7.1250 0.3125 0.470
KB-70 CPO 7.0000 7.6250 0.3125 0.500
KB-75 CPO 7.5000 8.1250 0.3125 0.540
KB-80 CPO 8.0000 8.6250 0.3125 0.570
KB-90 CPO 9.0000 9.6250 0.3125 0.640
KB-100 CPO 10.0000 10.6250 0.3125 0.730
KB-110 CPO  11.0000 11.6250 0.3125 0.750
KB-120 CPO 12.0000 12.6250 0.3125 0.830
KB-140 CPO  14.0000 14.6250 0.3125 1.050
KB-160 CPO  16.0000 16.6250 0.3125 1.200
KB-180 CPO  18.0000 18.3625 0.3125 1.350
KB-200 CPO 20.0000 20.6250 0.3125 1.500
KC-40 CPO 4.0000 4.7500 0.3750 0.400
KC-42 CPO 4.2500 5.0000 0.3750 0.420
KC-45 CPO 4.5000 5.2500 0.3750 0.440
KC-47 CPO 4.7500 5.5000 0.3750 0.460
KC-50 CPO 5.0000 5.7500 0.3750 0.490
KC-55 CPO 5.5000 6.2500 0.3750 0.590
KC-60 CPO 6.0000 6.7500 0.3750 0.630
KC-65 CPO 6.5000 7.2500 0.3750 0.690
KC-70 CPO 7.0000 7.7500 0.3750 0.730
KC-75 CPO 7.5000 8.2500 0.3750 0.780
KC-80 CPO 8.0000 8.7500 0.3750 0.300
KC-90 CPO 9.0000 9.7500 0.3750 0.930
KC-100 CPO 10.0000 10.7500 0.3750 1.030
KC-110 CPO 11.0000 11.7500 0.3750 1.130
KC-120 CPO 12.0000 12.7500 0.3750 1.230
KC-140 CPO 14.0000 14.7500 0.3750 1.520
KC-160 CPO 16.0000 16.7500 0.3750 1.730
KC-180 CPO 18.0000 18.7500 0.3750 1.940
KC-200 CPO 20.0000 20.7500 0.3750 2.160
KC-250 CPO 25.0000 25.7500 0.3750 2.690
KC-300 CPO 30.0000 30.7500 0.3750 3.210
KD-40 CPO 4.0000 5.0000 0.5000 0.720
KD-42 CPO 4.2500 5.2500 0.5000 0.760
KD-45 CPO 4.5000 5.5000 0.5000 0.800
KD-47 CPO 4.7500 5.7500 0.5000 0.840
KD-50 CPO 5.0000 6.0000 0.5000 0.880
KD-55 CPO 5.5000 6.5000 0.5000 0.960
KD-60 CPO 6.0000 7.0000 0.5000 1.040
KD-65 CPO 6.5000 7.5000 0.5000 1.120
KD-70 CPO 7.0000 8.0000 0.5000 1.200
KD-75 CPO 7.5000 8.5000 0.5000 1.420
KD-80 CPO 8.0000 9.0000 0.5000 1.500
KD-90 CPO 9.0000 10.0000 0.5000 1.680
KD-100 CPO 10.0000 11.0000 0.5000 1.860
KD-110 CPO 11.0000 12.0000 0.5000 2.030
KD-120 CPO 12.0000 13.0000 0.5000 2.210
KD-140 CPO 14.0000 15.0000 0.5000 2.730
KD-160 CPO 16.0000 17.0000 0.5000 3.100
KD-180 CPO 18.0000 19.0000 0.5000 3.480
KD-200 CPO 20.0000 21.0000 0.5000 3.850
KD-250 CPO 25.0000 26.0000 0.5000 4.790
KD-300 CPO 30.0000 31.0000 0.5000 5.730
KF-40 CPO 4.0000 5.5000 0.7500 1.710
KF-42 CPO 4.2500 5.7500 0.7500 1.800
KF-45 CPO 4.5000 6.0000 0.7500 1.890
KF-47 CPO 4.7500 6.2500 0.7500 1.980
KF-50 CPO 5.0000 6.5000 0.7500 2.070
KF-55 CPO 5.5000 7.0000 0.7500 2.250
KF-60 CPO 6.0000 7.5000 0.7500 2.430
KF-65 CPO 6.5000 8.0000 0.7500 2.600
KF-70 CPO 7.0000 8.5000 0.7500 2.780
KF-75 CPO 7.5000 9.0000 0.7500 2.980
KF-80 CPO 8.0000 9.5000 0.7500 3.150
KF-90 CPO 9.0000 10.5000 0.7500 3.510
KF-100 CPO 10.0000 11.5000 0.7500 3.860
KF-110 CPO 11.0000 12.5000 0.7500 4.240
KF-120 CPO 12.0000 13.5000 0.7500 5.090
KF-140 CPO 14.0000 15.5000 0.7500 6.000
KF-160 CPO 16.0000 17.5000 0.7500 7.100
KF-180 CPO 18.0000 19.5000 0.7500 7.900
KF-200 CPO 20.0000 21.5000 0.7500 83.900
KF-250 CPO 25.0000 26.5000 0.7500 10.900
KF-300 CPO 30.0000 31.5000 0.7500 13.000
KF-350 CPO 35.0000 36.5000 0.7500 15.100
KF-400 CPO 40.0000 41.5000 0.7500 17.200
KG-40 CPO 4.0000 6.0000 1.0000 3.600
KG-42 CPO 4.2500 6.2500 1.0000 3.800
KG-45 CPO 4.5000 6.5000 1.0000 4.000
KG-47 CPO 4.7500 6.7500 1.0000 4.100
KG-50 CPO 5.0000 7.0000 1.0000 4.300
KG-55 CPO 5.5000 7.5000 1.0000 4.700
KG-60 CPO 6.0000 8.0000 1.0000 5.100
KG-65 CPO 6.5000 8.5000 1.0000 5.400
KG-70 CPO 7.0000 9.0000 1.0000 5.800
KG-75 CPO 7.5000 9.5000 1.0000 6.010
KG-80 CPO 8.0000 10.0000 1.0000 6.500
KG-90 CPO 9.0000 11.0000 1.0000 7.200
KG-100 CPO 10.0000 12.0000 1.0000 7.900
KG-110 CPO 11.0000 13.0000 1.0000 8.600
KG-120 CPO 12.0000 14.0000 1.0000 9.300
KG-140 CPO 14.0000 16.0000 1.0000 10.800
KG-160 CPO 16.0000 18.0000 1.0000 12.300
KG-180 CPO 18.0000 20.0000 1.0000 13.700
KG-200 CPO 20.0000 22.0000 1.0000 18.800
KG-250 CPO 25.0000 27.0000 1.0000 19.500
KG-300 CPO 30.0000 32.0000 1.0000 23.300
KG-350 CPO 35.0000 37.0000 1.0000 27.100
KG-400 CPO 40.0000 42.0000 1.0000 30.800

1 Read More →

Thrust Roller Bearing

Thrust Roller Bearing

Thrust Roller Bearing

Thrust roller bearings can accommodate heavy axial loads. Bearings of some structural groups can additionally accommodate slight radial load. They allow much lower rotational speeds as it is compared with other types of bearings.
Thrust roller bearings are available of the following design variants:
single direction bearings with cylindrical rollers and a solid cage.
single direction double-row bearings with cylindrical rollers and a solid cage. Two short rollers of varying lengths are installed into the pocket of the cage instead of one long roller in order to reduce the slippage
occurring between the rollers and ring raceways due to the difference of linear velocities.
bearings with cylindrical rollers without rings and with a solid cage. Hardness and accuracy of rolling surface in contact with the rolling surface of the rollers should be the same as that of the bearing rings.
bearings with needle rollers with one ring and a pressed cage.Hardness and accuracy of rolling surface in contact with the rolling surface of the rollers should be the same as that of the bearing rings.
double direction bearings with cylindrical rollers and a solid cage. Axial load in both directions is applied.
single direction taper roller bearings with ribs on shaft washer and housing washer with a solid cage.
single direction full complement taper roller bearings installed into the housing. The bearings have one flanged ring and one flat ring.
bearings with spherical rollers and solid or pressed cage. The bearings are subjected to heavy axial and light radial loads. They allow higher rotational speeds as compared with thrust roller bearings of other types. The bearings are self-aligned relative to the centre of spherical housing washer raceway. Solid cages are produced of nonferrous metal or steel.
Thrust roller bearings are used in rolling mills, globoid gears (cone-worm units), machine tool tables, swivel of oil-producing machines.
0 Read More →

Taper Roller Bearing

Taper Roller Bearing Metric and Inch Series

Taper Roller Bearing Metric and Inch Series

Metric single row taper roller bearings
Inch single row taper roller bearings
Single row taper roller bearings with a flanged outer ring 
Matched bearings arranged face to face, back to back, in tandem

Taper roller bearings have tapered inner and outer ring raceways and tapered rollers.
They are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. 
The projection lines of the raceways meet at a common point on the bearing axis to provide true rolling and low friction. 

0 Read More →

Inch Series Deep Groove Ball Bearing, non-standard bearing

Linqing Minhang Precision Bearing Co.,Ltd. supply the inch size deep groove ball bearings LS XLS LJ XLJ 1600 series. the details items are following:

Inch Series DeepGroove Ball Bearing
SYMH
Designation		Dimension (inch)Weight
(lbs)		Equivalents
BoreO.D.B
XLS-1 3/81.37502.56250.56250.400XLS-1 3/8XLJ-1 3/8XLS-1 3/8
XLS-1 1/21.50002.68750.56250.440XLS-1 1/2XLJ-1 1/2XLS-1 1/2
XLS-1 5/81.62502.87500.56250.630XLS-1 5/8XLJ-1 5/8XLS-1 5/8
XLS-1 3/41.75003.00000.56250.530XLS-1 3/4XLJ-1 3/4XLS-1 3/4
XLS-1 7/81.87503.18750.62500.810XLS-1 7/8XLJ-1 7/8XLS-1 7/8
XLS-22.00003.31250.62500.880XLS-2XLJ-2XLS-2
XLS-2 1/82.12503.43750.62500.780XLS-2 1/8XLJ-2 1/8XLS-2 1/8
XLS-2 1/42.25003.56250.62500.910XLS-2 1/4XLJ-2 1/4XLS-2 1/4
XLS-2 3/82.37503.75000.68750.900XLS-2 3/8XLJ-2 3/8XLS-2 3/8
XLS-2 1/22.50003.87500.68751.130XLS-2 1/2XLJ-2 1/2XLS-2 1/2
XLS-2 5/82.62504.12500.68751.250XLS-2 5/8XLJ-2 5/8XLS-2 5/8
XLS-2 3/42.75004.12500.68751.090XLS-2 3/4XLJ-2 3/4XLS-2 3/4
XLS-2 7/82.87504.50000.75001.670XLS-2 7/8XLJ-2 7/8XLS-2 7/8
XLS-33.00004.50000.75001.560XLS-3XLJ-3XLS-3
XLS-3 1/83.12504.75000.75001.610XLS-3 1/8XLJ-3 1/8XLS-3 1/8
XLS-3 1/43.25004.75000.75001.530XLS-3 1/4XLJ-3 1/4XLS-3 1/4
XLS-3 3/83.37505.00000.75001.840XLS-3 3/8XLJ-3 3/8XLS-3 3/8
XLS-3 1/23.50005.00000.75001.750XLS-3 1/2XLJ-3 1/2XLS-3 1/2
XLS-3 5/83.62505.25000.75002.010XLS-3 5/8XLJ-3 5/8XLS-3 5/8
XLS-3 3/43.75005.25000.75001.840XLS-3 3/4XLJ-3 3/4XLS-3 3/4
XLS-3 7/83.87505.62500.87502.630XLS-3 7/8XLJ-3 7/8XLS-3 7/8
XLS-44.00005.62500.87502.500XLS-4XLJ-4 EXLS-4
XLS-4 1/84.12506.00000.87503.000XLS-4 1/8XLJ-4 1/8XLS-4 1/8
XLS-4 1/44.25006.00000.87502.870XLS-4 1/4XLJ-4 1/4 EXLS-4 1/4
XLS-4 3/84.37506.25000.87503.130XLS-4 3/8XLJ-4 3/8XLS-4 3/8
XLS-4 1/24.50006.25000.87503.020XLS-4 1/2XLJ-4 1/2 EXLS-4 1/2
XLS-4 5/84.62506.50000.87503.340XLS-4 5/8XLJ-4 5/8XLS-4 5/8
XLS-4 3/44.75006.50000.87503.100XLS-4 3/4XLJ-4 3/4 EXLS-4 3/4
XLS-4 7/84.87507.00001.00004.590XLS-4 7/8XLJ-4 7/8XLS-4 7/8
XLS-55.00007.00001.00004.500XLS-5XLJ-5 EXLS-5
XLS-5 1/85.12507.25001.00004.750XLS-5 1/8XLJ-5 1/8XLS-5 1/8
XLS-5 1/45.25007.25001.00004.690XLS-5 1/4XLJ-5 1/4 EXLS-5 1/4
XLS-5 3/85.37507.50001.00005.000XLS-5 3/8XLJ-5 3/8XLS-5 3/8
XLS-5 1/25.50007.50001.00004.510XLS-5 1/2XLJ-5 1/2 EXLS-5 1/2
XLS-5 5/85.62507.75001.00005.130XLS-5 5/8XLJ-5 5/8XLS-5 5/8
XLS-5 3/45.75007.75001.00004.800XLS-5 3/4XLJ-5 3/4 EXLS-5 3/4
XLS-5 7/85.87508.00001.00005.400XLS-5 7/8-XLS-5 7/8
XLS-66.00008.00001.00005.250XLS-6XLJ-6 EXLS-6
XLS-6 1/46.25008.50001.12506.730XLS-6 1/4-XLS-6 1/4
XLS-6 1/26.50008.75001.12507.560XLS-6 1/2XLJ-6 1/2 EXLS-6 1/2
XLS-6 3/46.75009.00001.12507.030XLS-6 3/4-XLS-6 3/4
XLS-77.00009.50001.25009.560XLS-7XLJ-7 EXLS-7
XLS-7 1/47.25009.75001.250010.100XLS-7 1/4-XLS-7 1/4
XLS-7 1/27.500010.00001.250010.250XLS-7 1/2XLJ-7 1/2 EXLS-7 1/2
XLS-7 3/47.750010.50001.375012.500XLS-7 3/4-XLS-7 3/4
XLS-88.000010.75001.375013.000XLS-8XLJ-8 EXLS-8
XLS-8 1/48.250011.00001.375013.500XLS-8 1/4-XLS-8 1/4
XLS-8 1/28.500011.50001.500017.000XLS-8 1/2XLJ-8 1/2 EXLS-8 1/2
XLS-8 3/48.750011.75001.500017.380XLS-8 3/4-XLS-8 3/4
XLS-99.000012.00001.500017.870XLS-9XLJ-9 EXLS-9
XLS-9 1/29.500012.75001.625022.000XLS-9 1/2XLJ-9 1/2 EXLS-9 1/2
XLS-1010.000013.25001.625023.000XLS-10XLJ-10 EXLS-10
XLS-10 1/210.500014.00001.750028.100XLS-10 1/2XLJ-10 1/2 EXLS-10 1/2
XLS-1111.000014.50001.750029.300XLS-11XLJ-11 EXLS-11
XLS-11 1/211.500015.25001.750035.300XLS-11 1/2XLJ-11 1/2 EXLS-11 1/2
XLS-1212.000016.00002.000041.060XLS-12XLJ-12 EXLS-12
XLS-12 1/212.500016.50002.000043.800XLS-12 1/2-XLS-12 1/2
XLS-1313.000017.50002.250058.300XLS-13XLJ-13 EXLS-13
XLS-13 1/213.500018.00002.250060.400XLS-13 1/2-XLS-13 1/2
XLS-1414.000018.50002.250062.500XLS-14XLJ-14 EXLS-14
XLS-14 1/214.500019.50002.500080.000XLS-14 1/2-XLS-14 1/2
XLS-1515.000020.00002.500082.300XLS-15XLJ-15 EXLS-15
XLS-15 1/215.500020.50002.500085.560XLS-15 1/2-XLS-15 1/2
XLS-1616.000021.50002.7500107.000XLS-16-XLS-16
XLS-16 1/216.500022.00002.7500110.000XLS-16 1/2-XLS-16 1/2
XLS-1717.000022.50002.7500113.000XLS-17-XLS-17
XLS-17 1/217.500023.50003.0000139.000XLS-17 1/2-XLS-17 1/2
XLS-1818.000024.00003.0000142.000XLS-18-XLS-18
XLS-18 1/218.500024.50003.0000145.000XLS-18 1/2-XLS-18 1/2
XLS-1919.000025.50003.2500176.000XLS-19-XLS-19
XLS-19 1/219.500026.00003.2500180.000XLS-19 1/2-XLS-19 1/2
XLS-2020.000026.50003.2500184.000XLS-20-XLS-20
XLS-20 1/220.500027.50003.5000221.000XLS-20 1/2-XLS-20 1/2
XLS-2121.000028.00003.5000227.000XLS-21-XLS-21
LS-50.50001.31250.37500.120LS-5LJ- 1/2RLS-4
LS-70.62501.56250.43750.160LS-7LJ- 5/8RLS-5
LS-80.75001.87500.56250.280LS-8LJ- 3/4RLS-6
LS-90.87502.00000.56250.320LS-9LJ- 7/8RLS-7
LS-101.00002.25000.62500.420LS-10LJ-1RLS-8
LS-10-NR1.00002.25000.62500.420LS-10-NRLJ-1-NRRLS-8-NR
LS-111.12502.50000.62500.510LS-11LJ-1 1/8RLS-9
LS-11-NR1.12502.50000.62500.510LS-11-NRLJ-1 1/8-NRRLS-9-NR
LS-121.25002.75000.68750.630LS-12LJ-1 1/4RLS-10
LS-12-NR1.25002.75000.68750.630LS-12-NRLJ-1 1/4-NRRLS-10-NR
LS-12 1/21.37503.00000.68750.870LS-12 1/2LJ-1 3/8RLS-11
LS-12 1/2 -NR1.37503.00000.68750.870LS-12 1/2 -NRLJ-1 3/8-NRRLS-11-NR
LS-131.50003.25000.75001.100LS-13LJ-1 1/2RLS-12
LS-13 1/21.62503.50000.75001.290LS-13 1/2LJ-1 5/8RLS-13
LS-141.75003.75000.81251.610LS-14LJ-1 3/4RLS-14
LS-14 1/21.87504.00000.81251.850LS-14 1/2LJ-1 7/8RLS-15
LS-152.00004.00000.81251.780LS-15LJ-2RLS-16
LS-162.25004.50000.87502.400LS-16LJ-2 1/4RLS-18
LS-172.50005.00000.93753.150LS-17LJ-2 1/2RLS-20
LS-182.75005.25000.93753.400LS-18LJ-2 3/4RLS-22
LS-193.00005.75001.06254.650LS-19LJ-3RLS-24
LS-19 1/23.25006.00001.06254.900LS-19 1/2LJ-3 1/4RLS-26
LS-203.50006.50001.12506.200LS-20LJ-3 1/2RLS-28
LS-20 1/23.75006.75001.12506.700LS-20 1/2LJ-3 3/4RLS-30
LS-214.00007.25001.25008.800LS-21LJ-4 ERLS-32
LS-21 1/24.25007.50001.25009.150LS-21 1/2LJ-4 1/4 ERLS-34
LS-224.50008.00001.312511.200LS-22LJ-4 1/2 ERLS-36
LS-22 1/24.75008.25001.312511.400LS-22 1/2LJ-4 3/4 ERLS-38
LS-235.00009.00001.375015.000LS-23LJ-5 ERLS-40
LS-23 1/25.50009.50001.375015.600LS-23 1/2LJ-5 1/2 ERLS-44
LS-246.000010.50001.562520.900LS-24LJ-6 ERLS-48
LS-24 1/26.500011.00001.562522.500LS-24 1/2LJ-6 1/2 ERLS-52
LS-257.000012.00001.750031.000LS-25LJ-7 ERLS-56
LS-25 1/27.500012.50001.750032.000LS-25 1/2LJ-7 1/2 ERLS-60
LS-268.000013.00001.750035.000LS-26LJ-8 ERLS-64
LS-26 1/28.500014.00002.000046.500LS-26 1/2LJ-8 1/2 ERLS-68
LS-279.000014.50002.000049.750LS-27LJ-9 ERLS-72
LS-27 1/29.500015.12502.000050.000LS-27 1/2LJ-9 1/2 E-
LS-2810.000015.75002.000056.300LS-28LJ-10 ERLS-80
LS-28 1/210.500016.62502.250071.700LS-28 1/2LJ-10 1/2 E-
LS-2911.000017.50002.250079.600LS-29LJ-11 ERLS-88
LS-29 1/211.500018.00002.375084.900LS-29 1/2LJ-11 1/2 E-
LS-3012.000018.50002.625098.000LS-30LJ-12 ERLS-92
LS-3113.000020.00002.7500114.000LS-31LJ-13 E-
LS-3214.000021.50002.8750144.000LS-32LJ-14 E-
LS-3315.000022.50003.0000157.000LS-33LJ-15 E-
16010.18750.68750.25000.025BR-0121103-001601  NS
16020.25000.68750.25000.025BR-0221104-001602  NS
16030.31250.87500.28120.033BR-0321405-001603  NS
16040.37500.87500.28120.040BR-0421406-001604  NS
16050.31250.90620.31250.034BR-0521505-001605  NS
16060.37500.90620.31250.035BR-0621506-001606  NS
16070.43750.90620.31250.060BR-0721507-001607  NS
16140.37501.12500.37500.077BR-1421806-001614  NS
16150.43751.12500.37500.071BR-1521807-001615  NS
16160.50001.12500.37500.066BR-1621808-001616  NS
16200.43751.37500.43750.110BR-2022207-001620  NS
16210.50001.37500.43750.106BR-2122208-001621  NS
16220.56251.37500.43750.101BR-2222209-001622  NS
16230.62501.37500.43750.088BR-2322210-001623  NS
16280.62501.62500.50000.159BR-2822610-001628  NS
16300.75001.62500.50000.143BR-3022612-001630  NS
16330.62501.75000.50000.203BR-3322810-001633  NS
16350.75001.75000.50000.187BR-3522812-001635  NS
16380.75002.00000.56250.265BR-3823212-001638  NS
16400.87502.00000.56250.247BR-4023214-001640  NS
16411.00002.00000.56250.221BR-4123216-001641  NS
16521.12502.50000.62500.463BR-5224018-001652  NS
16541.25002.50000.62500.419BR-5424020-001654  NS
16571.25002.56250.68750.474-24120-001657  NS
16581.31252.56250.68750.441-24121-001658  NS
, , , 0 Read More →